BRCS03X (IEC62955+IEC62752, 5V)
BRCS03X (IEC62955+IEC62752, 5V)
The BRCS03X is a high-performance AC/DC residual current sensor featuring two independent fault signal outputs: one pin for Type A 30 mA & DC 6 mA leakage current detection and another pin exclusively for DC 6 mA leakage current detection. This dual-output design makes the sensor suitable for built-in RCD / RDC-DD applications in AC charging stations, ensuring compliance with IEC 61851-1 and IEC 60364-7-722 standards.
Product Highlights
PCB-mount compatibility
Helps EV charger manufacturers streamline their supply chain by eliminating the need for multiple charging controller PCB versions, enabling easy integration of the 5V sensor.
Precise detection
Advanced measurement technologies that significantly reduce nuisance tripping, ensuring a stable and reliable charging experience.
Larger Pass-Through Opening
Features an 18mm diameter pass-through opening, significantly larger than the 13.5mm offered by our peer, allowing easy passage of thicker cables for enhanced installation flexibility.
High reliability
Designed with a robust mechanical and electrical architecture to withstand harsh environments, including humidity, onboard vibration, and challenging EMC conditions.
Main Features
Relevant Product Standard: IEC 62955, IEC 62752
Rated DC residual operating current I△dc: 6 mA
Rated DC residual non-operating current I△ndc: 3 mA
Rated AC residual operating current I△n: 30 mA
Rated AC residual non-operating current I△nc: 15 mA
DC Supply Voltage (Vcc): 5V DC ± 3%
PIN Description: NC, Test, DC Trip, AC&DC Trip, GND, 5V DC
Rated operating temperature: -40~85 ℃
PWM-OUT Pin and N.C. Pin – being not necessary for built-in residual current protection at EV charging applications – are not included in the BRCS03X design. However, it won’t influence the compatible integration on the EV charger side.
Data Sheet
Download
